{"data":{"model":{"id":"1065469","slug":"jl-pip-pine-tree","name":"JL PIP pine Tree","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":1,"description":"

Made in collaboration with: @cplum_2524920

Lesson Plan and Constraints:

We have been tasked to create a 3D-printed object where the inner layers would shake and extrude out making a 3D shape.

Summary / How to:

My Print In Place (PIP) design features a pine tree, with the tree being offset 11 times, resulting in 12 layers in total. I chose a pine tree because Christmas is just around the corner.

For anyone creating their own PIP pine tree, I recommend using the offset tool to create the inner layers.

Creating constraint box:

Create a new part
Select the front plane
For this design, it does not work when it is inside a constraint box
Draw a 1.35 cm line up the origin
Then from the bottom of the line that was just drawn draw a 3.55 cm line across

(these lines will be the trunk of the tree and a reference for the rest of the tree)

Creating the branches/triangles:

From the top of the first line we drew make another line that is 3.55 cm long.
Following this make a diagonal line that goes to the right, make this line 1.90 cm long and an angle of 52\u00b0
Repeat steps 1 and 2 but use the following measurements

(1.30 cm, 2.50 cm, 50\u00b0) (0.85 cm, 7.11 cm, 52\u00b0)

Make a construction line that goes through the figure and mirror the half across the construction line so it fills in the shape

Your sketch should look like this :

Offset entities:

First, select the Offset entities tool in Solidworks
Then select the sketch, you will notice a yellow outline that goes around the sketch
In the Offset entities settings set the parameters to 0.1 cm
Select the box that says reverse
Check of the yellow lines are correct
After you have verified that it looks correct click the green check mark to offset the sketch.
You will continue to offset every new sketch that is drawn until you are unable to

Once finished it should look like this:

Boss-Extrude your sketch:

Go out of sketch mode, when done the sketch should become gray. Make sure to select ONLY the outside line
Go to the features tab and select Boss-Extrude
Set the height to 1.00 cm
And the degree to 15.00 degrees
And press the green check mark

Extrude-Cut:

Click the second-most outer layer of your sketch
Click the button with the two arrows to reverse the direction of the cut

(make sure you are cutting into the shape)

If one of the settings says {Blind} change it to [through-All]
For the height of the cut set it to 1. oo cm
Set the degree of the cut to 15.00 degrees

(Keep repeating these steps until you reach 10)

Once finished the first side should look like this:

Mirror the figure:

Select the front plane used for the feature tree (front plane)
Navigate to the mirror settings, then change the menu option to [Bodies].
Select every ring, and make sure [Merge solids] is selected
Click the green check mark to finalize the mirror, after this is done the other half of the tree should be filled out

Your mirror should look like this:

Design Choices / Changes:

When designing pine tree V.1.0, we initially chose an offset angle of 25\u00b0 for each layer. We liked these dimensions because they made the tree appear thicker. However, once we finalized the design, we found that we could only fit about 6 offsets within the entire sketch. After printing, we realized that if we stuck with the 25\u00b0 offset, not only would we be limited to just 6 layers, but the side meant to be concave wouldn\u2019t have enough space or depth to form correctly. This is why for pine tree PIP V.2.5 we changed the degree for the offsets to 15\u00b0 so the tree would be flatter and have more room to add more offsets and alow it to secsefully go inside out.

TREE PIP V1.0

For the first design, we went with 25\u00b0. This caused the figure to not have enough offsets, which made the max number of layers to be 6. This design was simple and easy but did not work overall due to the layers occasionally getting stuck on each other and the triangles not going as deep as we wanted.

TREE PIP V2.0:
For our second version, we went with a lower degree for the offsets and cuts, we brought it from 25\u00b0 to 15\u00b0. This small number change was a huge difference in our design. After this change, we were able to add up to 23 layers! It was a major improvement, the triangles would not get stuck on each other and the shapes would extrude farther

TREE PIP V2.5:
Although this was a success, 23 layers proved too much for the printers, so we had to reduce the design from 23 layers to 12. While it was a bit smaller, it would still work effectively and only be slightly shorter.

","category":{"id":"70","path":[{"id":"65","name":"Seasonal designs","nameEn":"Seasonal designs","description":"Celebrate seasonal holidays with 3D creations and festive designs. All year round, there are plenty of opportunities to decorate your house or your office.","__typename":"CategoryType"},{"id":"70","name":"Winter & Christmas & New Year's","nameEn":"Winter & Christmas & New Year's","description":"Make this year's Christmas holidays special. Print various decorations and baubles, snowflakes, bells, Santa Claus miniatures, or even a whole Christmas tree!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-12T14:06:13.140942+00:00","firstPublish":"2024-11-12T14:06:13.111906+00:00","datePublished":"2024-11-12T14:06:13.116823+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"This fun and simple pine tree fidget has had me hooked on shaking it during class!","likesCount":2,"makesCount":1,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":8,"displayCount":60,"filesCount":1,"privateCollectionsCount":1,"publicCollectionsCount":1,"pdfFilePath":"media/prints/1065469/pdfs/1065469-jl-pip-pine-tree-028ce3fc-f989-4088-8908-075254a58dc0.pdf","commentCount":2,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"3734365","filePath":"media/prints/1065469/images/8068527_1cfff767-fd53-450c-9cce-84306991f7bf_54cf073f-5948-4e9a-9524-fc78212713f0/screenshot-2024-11-08-101107.png","rotation":0,"imageHash":"K/gJDgLLV/haiIcnqKWKcqhZ4M9fv+k=","imageWidth":872,"imageHeight":968,"__typename":"PrintImageType"},"images":[{"id":"3734365","filePath":"media/prints/1065469/images/8068527_1cfff767-fd53-450c-9cce-84306991f7bf_54cf073f-5948-4e9a-9524-fc78212713f0/screenshot-2024-11-08-101107.png","rotation":0,"imageHash":"K/gJDgLLV/haiIcnqKWKcqhZ4M9fv+k=","imageWidth":872,"imageHeight":968,"__typename":"PrintImageType"},{"id":"3734364","filePath":"media/prints/1065469/images/8068529_8c9d44f3-7d21-4071-b2d7-b502e89d6adb_6000360d-e770-42b4-882d-086204726704/screenshot-2024-11-08-101119.png","rotation":0,"imageHash":"ZAgSFgb0eHiHd7hYd4Z4mZh484OMjvg=","imageWidth":965,"imageHeight":1169,"__typename":"PrintImageType"},{"id":"3734366","filePath":"media/prints/1065469/images/8068528_d1c16e42-3fde-4a22-bc9d-eee2cfda6895_15e2496c-dde8-45c3-809a-c472e2534f17/screenshot-2024-11-08-101129.png","rotation":0,"imageHash":"Z/gNFgTAeleIZrhrhpmYeIaHwJJMf/k=","imageWidth":1111,"imageHeight":1294,"__typename":"PrintImageType"},{"id":"3734339","filePath":"media/prints/1065469/images/8068472_3dedcdc6-59ad-46d4-8cad-f100e939433c_30330284-63a0-4008-bee9-66b696586420/screenshot-2024-11-04-140400.png","rotation":0,"imageHash":"tPcNDwD3aXeGh3eeZIeIhmeItz75y5IP","imageWidth":1458,"imageHeight":1519,"__typename":"PrintImageType"}],"tags":[],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"4446458","filePreviewPath":"media/prints/1065469/previews/134b1eea186004fe8b8acf80a3d4a42b33ccb359.png","__typename":"STLType"},"license":{"id":"7","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"1065469","name":"JL PIP pine Tree","slug":"jl-pip-pine-tree","ratingAvg":"5.0000000000","likesCount":2,"liked":null,"datePublished":"2024-11-12T14:06:13.116823+00:00","dateFeatured":null,"firstPublish":"2024-11-12T14:06:13.111906+00:00","downloadCount":8,"mmu":false,"category":{"id":"70","path":[{"id":"65","name":"Seasonal designs","nameEn":"Seasonal designs","__typename":"CategoryType"},{"id":"70","name":"Winter & Christmas & New Year's","nameEn":"Winter & Christmas & New Year's","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-12T14:06:13.140942+00:00","image":{"id":"3734365","filePath":"media/prints/1065469/images/8068527_1cfff767-fd53-450c-9cce-84306991f7bf_54cf073f-5948-4e9a-9524-fc78212713f0/screenshot-2024-11-08-101107.png","rotation":0,"imageHash":"K/gJDgLLV/haiIcnqKWKcqhZ4M9fv+k=","imageWidth":872,"imageHeight":968,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1152960","name":"Igloo Pencil sharpener","slug":"igloo-pencil-sharpener","ratingAvg":"0E-10","likesCount":1,"liked":null,"datePublished":"2025-02-03T19:09:24.730596+00:00","dateFeatured":null,"firstPublish":"2025-01-18T23:30:51.822751+00:00","downloadCount":2,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-03T19:09:24.756253+00:00","image":{"id":"4001954","filePath":"media/prints/1152960/images/8707951_fb4bb757-c785-4784-bc8c-d2d6807da843_d2b2e42c-84c3-4ec3-97e9-45816702cf63/screenshot-2025-01-18-182944.png","rotation":0,"imageHash":"nzkKJQRYZ4uGB3g3h4JZZ7WAWQyX","imageWidth":498,"imageHeight":662,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1177064","name":"Squid game Gonggi set (print 2 circles, and 2 triangles)","slug":"squid-game-gonggi-set-print-2-circles-and-2-triang","ratingAvg":"0E-10","likesCount":1,"liked":null,"datePublished":"2025-02-04T00:17:23.384614+00:00","dateFeatured":null,"firstPublish":"2025-02-04T00:17:23.380171+00:00","downloadCount":14,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-04T00:17:23.401994+00:00","image":{"id":"4069606","filePath":"media/prints/1177064/images/8857536_2946b423-df98-46b1-a089-f3ac03124b1f_c0eb8286-55e0-4da6-890b-e54cc149dc6b/screenshot-2025-02-03-191547.png","rotation":0,"imageHash":"W/gNCgaQV3d4iXiXAVmOh/c=","imageWidth":175,"imageHeight":547,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1176948","name":"Guts Berserker brand of Sacrifice PIP","slug":"guts-berserker-brand-of-sacrifice-pip","ratingAvg":"0E-10","likesCount":1,"liked":null,"datePublished":"2025-02-03T23:13:26.869310+00:00","dateFeatured":null,"firstPublish":"2025-02-03T22:07:08.320199+00:00","downloadCount":5,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-02-03T23:13:26.883033+00:00","image":{"id":"4069234","filePath":"media/prints/1176948/images/8856725_f9c05d3a-abed-4b9d-8b3f-ca6a6f5cc228_59ad4258-ef2b-4cb4-b32d-c739076bfd31/screenshot-2025-02-03-170547.png","rotation":0,"imageHash":"oDgKFgh3l/daeGdqh1hnaHd4BYhzUDc=","imageWidth":379,"imageHeight":474,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"1049043","name":"Ghost Clip","slug":"ghost-clip","ratingAvg":"0E-10","likesCount":0,"liked":null,"datePublished":"2024-10-25T16:43:20.646438+00:00","dateFeatured":null,"firstPublish":"2024-10-25T16:43:20.642625+00:00","downloadCount":5,"mmu":false,"category":{"id":"12","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"12","name":"Test Models","nameEn":"Test Models","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-10-25T16:43:20.666099+00:00","image":{"id":"3678457","filePath":"media/prints/1049043/images/7949153_ec76b707-cf30-494c-bafc-1c5ff7887468_29d6c670-bdac-4878-8b68-0f611d548222/screenshot-2024-10-23-131127.png","rotation":0,"imageHash":"ZykKHgT3mPtYeGeId3iIeIeI9YpJn6g=","imageWidth":756,"imageHeight":938,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"2527457","handle":"Jemus_2527457","verified":false,"dateVerified":null,"publicUsername":"Jemus","avatarFilePath":"media/auth/9b7906c8-1aa3-4ed3-b083-857eb04e3356.jpg","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

JL PIP pine Tree

Model files

Jamin_J_PIP_V3.3mf

Jamin_J_PIP_V3.3mf

Model origin

License