Raspberry Pi Touch Display 2 Stand

Works well, doesn't get in the way of any cables with my Pi4 and gives the display a nice rise above anything like a keyboard in front of it 👍

Great minimal screen stand. The angle of the legs is perfect, and gives enough height to raise it above my keyboard for a nice desktop status dashboard.

For sturdier use, you might want to find a model with a bezel as just the legs (obviously!) don't protect the thin glass edges of the screen. Thanks very much!

Thanks for the design, time to configure this Home Assistant desk panel

nice and simple, great as a stand-in for WIP projects. I added reinforcement to minimize flex as I'm putting extra hardware on the back. also added round slots for rubber feet so the .... feet won't slide around under rough handling.
I uploaded it as a remix.

Works as advertised! Perfect fit and stable even when using touch screen.

Filament:
Orange - Creality HyperPLA

Slicer:
Creality Print

Settings:
15% infill (zigzag)
3 top surface skin layers

Support:
Normal
Support Everywhere
Zigzag

Otherwise "Normal 0.2mm" preset

The stand fits perfectly for the Display 2. I have supplemented it with a modified Pi5 case and a frame I constructed myself. Works very well and looks smart too. Thanks for sharing!

The other half is in the works and the screen is coming next week hopefully :)

Thanks for the design Jeff!

The legs work great! Super simple print with minimal effort. Also fits so snug into the screw mounts. Was surprised to find that the display came with the screws too!