Loom Sampler Frame

UPDATE: 7 Feb '25 Requested larger frame size (200x200) for the 12.5dpi/10dpi loom loaded.

UPDATE 17 Nov.: Two new Loom frames with 2-axis options: 15dpi on the X, and 7.5dpi on the Y axis; other is 12.5dpi and 10dpi. Beaters updated and provided for all 4 dpi settings.

This was a request from the weaver in the house: a small frame for doing a quick sample weave to test fibres, colours, and small patterns. Initially created and printed the 15dpi frame and beater, then re-generated at 12.5dpi (not yet printed).  Line marks top & bottom at one inch, with a side inch rule as a guide.

Recommend a slow first layer and have filament dialled in well to maintain the teeth, especially with the beater.  The frame has ‘mouse ears’ to be removed post-printing, instead of a brim.  When printing just the beater you may get better results by turning off elephant foot settings in your Slicer.

Images also show one of the earlier versions.