Oddish Planter (Filled Hole)

This is a large print. Time depends on your printer and settings. Rafts / skirts / brims are not really needed if your bed adhesion is okay. If it won't stick to the bed, use a raft.

PLA is our preferred option, however you can use PETG for more durability and strength. Filament brand does not matter. As long as it is dry there won't be any problems. Color of filament also does not matter but it is preferred to be blue. Dual colour filaments are also possible and give out neat outcomes. Have bottom walls and side walls at least 4 to prevent water leakage.

Let us know if you have problems and we will try to respond as soon as possible. If you need any other custom designs let us know.

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu X1C

No

Supports:

No

At least 15%

Filament: Filaplast PLA Blue

Notes:

Dracaena plant is perfect for this little guy.

Post-Printing

This Oddish planter has a hole, that is why it has a small pot underneath. The planter in this file has hole filled so you won't need the pot.