SCS Small Card Slinger

Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined.
Its smaller cause I dreaded the long printing time.
While moddeling I thought about that people, me included, might prefer a version without a bottom for easier unloading. You need to do that more often cause it smaller.
It should hold around 100 Cards, i tested it with very old and “fluffy” Yu-Gi-Oh cards and it held around 75 before i needed to empty it.
Be aware the version with a bottom is 0.5mm shallower so you lose a few cards of volume.
The locking feature is experimental so I uploaded both versions, with and without.
For best/fastest scanning results use white or high contrast filament to make it easier for the scanning app.

SCS = SmallCardSlinger
PH = Phone Holder
B = bottom
L = lock 

Example: SCS1_L+PH1_L
Small Card Slinger 1 without Bottom, with Lock + Phone Holder 1 with Lock
 

Size of SCS1+PH1 is 139.9mm x 95.5mm because I wanted it to be able to print on a Flashforge Finder 2.

If you have any complaints or ideas to make it better, please leave a comment.

Also please go and visit the originals and give them a like, they deserve it and are what inspired this version.

Smaller in size, less Material an printing time, locking feature for phone holder.
Print in place if printer is calibrated well.
No bottom version if desired.