USB-C portable adjustable PSU DSP5005

what wire gauge should i get for the insides?

Love the design. My buddy and I made these, but modified it to use our Craftsman and Dewalt V20 batteries. (edited)

i didnt printed the handle but design is flawless :D

Thanks for the model! I had some issues with screw sizes, but other than that it went together pretty easily. Looks great on my desk and as a bonus, it stores neatly on top of my USB-C power supply. Printed using PolyMaker PollyTerra PLA with fuzzy skin enabled.

Great project, printed well.
I am facing a problem now, I bought another voltage booster (USB-C up to 28V), but if I use a USB-C to USB-C Power supply, I am getting no power at all. If I use the same power supply with the USB3 port, it works just fine. My guess is the power supply does not recognize the device as a power consumer. Does anyone have an idea how to trick the power supply to work?

Printed on MK4S with Esun PLA+ and ABS for the leg

Doesn't line up perfectly, but a bit of reaming with a drill cleared that up.

Still waiting for the USBC breakout, but the printed parts worked well.

Very nice model, thank you! I modified it slightly to make the face plate easily removable, I publish it soon

Nice solid chassis, printed with Elegoo PETG Pro after drying it out. 100% infill was probably overkill. It's quite heavy. Added 5525 barrel input to make use of old laptop bricks as well. Added a diode on the USB C feed to not be backfed when the barrel jack is used. I used the remix body so it could be printed without supports. Only complaint is that the back panel could be a mm thicker for extra rigidity.

Fun project.