Articulated Cute Snail

Tips for printing:

• Filament: PLA (only use PLA)
• Supports: No!
• Layer height: 0.16mm (optimal) (0.2mm also works)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: No!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

You can scale the snail a little smaller if you want. When scaling down the model, please make sure that the eyes do not become too small!

Colors and filament I used (4 Color Version):

• PLA / Orange - for the body
• PLA / Red - for the snail shell
• PLA / Black - for the eyes
• PLA / White - for the eyes

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

If you want to support me or use my models commercially you can use this link to my Patreon page. Thank you!
Patreon: https://patreon.com/3DPrintyi

Happy printing!