Simple Lantern - Three sizes

Simple decorative lanterns in three sizes
1141-001-Large size
1141-002-Middle size
1141-003-Small size

1141-001- base size is 175x175x345mm
1141-002- base size is 135x135x285mm
1141-003- base size is 110x110x225mm

Pillars need to be tapped on both ends:
1141-001-2- M5 thread in each pillar.
1141-002-2- M4 thread in each pillar.
1141-003-2- M3 thread in each pillar.

For 1141-001-  M5x20mm Allen screws (Socket head) x 8pcs
For 1141-002- M4x20mm Allen screws (Socket head) x 8pcs
For 1141-003- M3x20mm Allen screws (Socket head) x 8pcs

I printed pillars with 3 perimeters to avoid problems with tapping holes.

Top parts needs supports underneath. 
 

For light - LED candle light is recommended  

DON'T USE NORMAL CANDLE, it might cause that top part can melt in high temperature and cause fire

Layer high: 0,2 or lower
Material: PET-G, PLA, ABS etc,
Supports are needed on top parts.

Added two smaller size lanterns.
In 1141-001-3 chamfer size changed.
1141-001-4 changed size of eyelet.