CyberPunk Lamp

CYBERPUNK LAMP

(Sorry for the quality of the photos, this thing is led and my room is basically a cave so the illumination is awful 99% of the time)

Function over form. Easy to print, fits in the majority of beds (shade is 170mm tall), it should work with most of the bulbs because was designed to fit a big one. Works better with a RGB bulb (and obviously with more FPS).

I didn't had to do any assembly because the wires kept the light bulb in place and the shade (or cover) fits great with some pressure, but maybe you would need fix some things with hot glue.

Printing Tips

I printed the base in ABS, but should work even with PLA. Nothing special.

The shade can be a little more tricky because I printed it with a 1mm nozzle in clear PETG. Should work with a 0.8mm nozzle but It will require confirmation, because it's a pressure fit. 

• Vase mode
• 3 bottom layers
• 1.1mm perimeter extrusion width

The .step file is attached, feel free to remix, obviously quoting me ❤