Customizable Fixed/Removable Drawers for filament spools

Drawers for empty filament spools, can either be removable or not. supplied stls are for a spool with inner=90, outer=194 and height of 55. separator/end cap is for spool opening=53. Suggest creating a template in you slicer of just the top 2mm of the drawer - verify fit in the spool and use as a template for drilling the holes in the spool. I used common nails for the drawer pins. the end caps could be used with a threaded rod or equivalent to secure the stack of spools together.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

No

Supports:

No

**Resolution:**

.2

Infill:

10%

**Filament:** Inland PLA+ gray

Category: Tool Holders & Boxes