This is a pill box consisting of two parts. You can rotate it to get pills out.
Main features:
Print both the cover and the main body the way they are oriented. If needed sand a bit where the surfaces contact each other. When you are ready press the cover into the main body. This should require some force (tested on PLA). Afterwards both parts are not easily separated anymore.
I recommend printing with a layer height of 0.3 mm.
The OpenSCAD file is included to make proper customization possible.
Things that should be easy to change by just touching variables:
2022-01-01:
2022-12-20:
The author marked this model as their own original creation.