The Legend of Zelda: A Link to the Past Boss Key

Ever wanted to print a boss key from A Link to the Past? Well now you can!

This model consists of two pieces. One should be printed in black while the other in gold or yellow. If your printer is nicely calibrated then these pieces should snap together without much resistance at all. If the pieces don't sit snug, a dab of super glue should do the trick.

If you like this, check out my other designs. Also, please post a make. Thanks!

Print instructions

Category: Props Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm

Infill: 10%