Small Modular Hydroponic Tower

I remixed the original because the holes in the filter-spacer were missing and the box for the water and pump was too small and without a manitance opening for pooring water and measuring the PH- and EC-levels.

Printed with PETG for water resistance.

Tip: The tank can also be coated with epoxy resin for better cleaning and watertightness.

Print list:

• 1x: Watertank and Cover Watertank
• 2x: Filter with holes, Cover
• as often as you like: Plantingmodule and Netcup

Pump: https://www.amazon.de/dp/B0BW33SMVP
Hose: https://www.amazon.de/dp/B075V7ZK5L
Angled tube: https://www.amazon.de/dp/B0B8ZSR135

Holes in the filter-spacer, bigger box for the pump and a cover for the bigger box