SV06/+ Cartographer/Beacon Mount

This is my attempt at a probe for the cartographer that I just got home.
I wanted something a bit more rigid than the current options, as it has to be very rigid for Cartographer Survey.
I plan to add some wire guide option on the side, ideas welcome!

The mount uses an M3 heatset on the right side and a long M3 bolt for the left, into the toolhead.
The right side uses two M3 thin flat-headed screws.

The Y-offset is -17.744mm

Please leave a comment if you need any alteration made!

You can context me on Printables or in the Cartographer discord: https://discord.com/invite/EFSwpureHz