Celtic Cross Mountable - Embedded M3 Nuts
A small celtic cross remixed design to allow for it to be mountable with m3 screws
8
22
0
89
updated September 22, 2024
Description
PDFPrinted in Bambu PLA Matte - 15% infill - 0.08mm layers with 0.4 nozzle
Hardware required:
- 4x M3 nuts
- 4x M3 bolts (whatever length required)
There is some excess space left after the nut to allow some leeway with the screw length
Need to set a pause in the slicer to allow for adding the embedded nuts
Added a template guide to allow for drilling holes (notches are the 90 degree marks because of offset holes)
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Flattened and extended one side of the cross
Embedded 4x M3 Nuts to allow to be screwed into
Added a template guide to allow for drilling holes (notches are the 90 degree marks because of offset holes)
