Nissan X-trail T30 4x4 gearbox oil stick

This is an oil stick for X-trail T30 4x4 gearbox (2.0 l petrol, QR20DE). The service manual says "measure with…
2
9
0
504
updated December 22, 2021

Description

PDF

This is an oil stick for X-trail T30 4x4 gearbox (2.0 l petrol, QR20DE). The service manual says "measure with appropriate stick". I found it hard to first dip a stick and then measure it so I made this.The H-notch is at 168 mm deep and L is at 174 mm, as the manual states.

This works only for 4x4 models! 2WD has a different filling hole.

Usage instructions:

  • Remove the oil filling cap. It is a 10 mm hexagon screw
  • Push the dipstick as deep as it goes
  • Take it out and read the result

    Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0,3

Infill:

40


Filament:
PETG PETG Transparent

Notes:

Use whatever plastic that does not shrink(!) you have. I used PETG because it was loaded in my printer.

Transparent was a bad color choice because it is hard to see the oil on the stick (oil should be yellowish, not black)

As said above, do not use a shrinking material except if you compensate for the shrinking.

Post-Printing

Glue together the two parts with your favorite glue. I used gel like superglue.

You need to measure the correct distance as in the attached picture! I left some extra space in the top part because of printing errors, so if you push the stick all the way to the bottom the distance will be wrong.

How I Designed This

Designed in Fusion360 and sliced with Simplify3D

Category: Automotive

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License