ERCF v1.1 Flashforge 5DM Pro Extruder Fitting
Extruder fitting to avoid bowden tube from popping out during filament changes
4
14
0
224
updated September 18, 2024
Description
PDFEnraged Carrot Rabbit v1.1 Extruder fitting that sits atop Flashforge AD5M and AD5M Pro extruder to prevent the Bowden tube from popping out during ERCF Filament Changes.
Assembly:
The Bowden tube slides through from the pneumatic fitting into the AD5M extruder housing, providing a clean and clear pathway for the filament to pass. Screw in the M3 20mm on each side replacing the 6mm Flashforge provided M3 screws.
Recommended Print Settings:
Type: PETG
Walls: 5
Infill: 100%
BOM
- 1x PC4-M10 fitting: thread M10/6mm, inner diameter 4mm
- 1x 1.75mm Bowden tube 2.5mm OD
- Optional: Gorilla Glue if PC4-M10 is loose in print.
- 2x M3 20mm
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Removed drag chain mod
- Added pneumatic fitting PC4-M10 and cylinder housing
