Awesome design thank you!! not used it yet but have fitted it. luckily the springs didn't fly everywhere.. Thank you again
Anycubic Kobra 3 / S1 Combo - 5 Port Filament Input Hub
Keep all 5 tubes connected!
It just makes it easier to switch between the ACE PRO and the spool holder on the printer :)
84
652
2
3110
updated March 23, 2025
Makes
Comments
Very useful ! Now my tpu can be connected to the printer without being obliged to put off another pipe ! :-)
I must add I did not find any spring when opening the former one. (edited)
@Nordice How did you remove the upper part? Greetings Markus
@Worti With 1 or 2 small flathead screwdrivers and a LOT of patience.
And be warned. The 4 Springs inside like to jump across the room. 😅
Hello Nordice,
what kind of material did you use? And where are the springs and how many?
Thank you Markus
@Worti Hey Markus, I used simple PLA. You use the 4 original springs an collets. No need to buy anything :)
@Nordice Thank you for your prompt reply. Markus
Gread mod for anyone with an ACE Pro and wants to print TPU without having to pop out the PTFE to feed it from the spool A++ design. Will be keeping an eye out for V2. (edited)
@BadgerMilk_1901851 Thank you! :)
It was designed very well; I had assembled it wrong the first time and had a heck of a time getting it apart. I reprinted it, and I love it. It will make using a single spool of TPU much easier now.
Thank you
@KennyReniff_358201 I'm glad you like it! And thanks for the make! :)
@KennyReniff_358201 love this reply. I have the tube director thing and wanted to be able to reuse it. Super good to know itll work. The 8 colour hub i printed doesnt but i really only need 5 right now.
Quick question once I get the adapter on the factory feeder how do I get filament to feed into the correct tubes? Only asking before install and mess something up but it appears rather than into individual sleeves it feeds into the circular area of the adapter but has to travel down to the original individual tubes with no guide sorry if my wording doesn’t make sense lol
@AlexKloid_2305931 There is no correct or incorrect. Inside the original hub it is also just a big circular area which narrows the further you go down, just like a funnel. Inside the Hub are no individual tubes :)
como seria para cambiar entre el ACE y uno solo para usar ,como se hace el cambio ?
View 5 more comments
@Nordice perfect!!! Thanks
@guilleasmus_200897 You're welcome! :D
just got this setup, my springs went everywhere during setup, but user error. It looks and works great, thanks!
@RandyAnhalt_2204080 Yeah that happened to me, too. Should've mention that 🤣
Thanks for your download and feedback. I'm glad you like it! :)