Sovol SV08 cable chain

This is a slim version for having cable chain on the Sovol SV08 All the part are pre oriented in the best position. Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good adhesion you might need brim. recommended in ABS especially if you enclose your 3d printer.

For the Sovol SV08 you will need 25 Clips and 25 Chains

There are 2  version is for those who enter the toolhead wires from the top.  download “cable chain rail mount.stl”
If needed we have a for the the toolhead vires to come from the original location. just download this file "cable chain rail mount with toolhead cables.stl"

Print settings

Recommended in ABS or PETG

0.2 layer height
4 walls
5 top
5 bottom
15% infill

Bom 

1x M3x8mm
1x M3 T-nut 
and reuse the original cable holder screw.

this is a cable chain that we use for more than 3 year in our models.