SmashBox/Boxx Controller

This is a Printed SmashBox/Boxx Controller that i was commissioned to make.

its layout is similar to the SmashBox controller. and similar in size as well

but with a cable cubby and a sturdy carrying handle.

Bill of Materials:

• 16 x M4 12mm bolts
• 16 x M4 Heat-Set Inserts
• 4 x M3 30mm Countersunk bolts
• 4 x M3 Heat-Set Inserts
• Acrylic for the top
• 3mm Aluminum panel for the top
• 6mm Panel for the bottom (ACM, Acrylic, anything really) (optional)
• 26 x 24mm arcade buttons (Sanwa style)
• Panel Mount for USB and Ethernet (if using GCC to RJ45) (Neutrik Style)