Easter basket for FDM
Creality Ender 3 V2 Neo
2
February 18, 2024 at 3:49 PM
Original model
Comments
@Jamz58 You are dedicated! However I remember having an experience like yours with one of my baskets haha. Going forward, I may have tried to paint the seams well away from the overhang and used Z hop during those layers to avoid clipping. Looks great and thanks for sharing!
Love the design. Printed at 75%. with 0.2 layers. As anticipated, the overhang on the handles was an issue because they deflect down during fill and then spring up afterword so the nozzle catches on it to start the next layer.. I had to manually intervein by gently holding each side down to start each layer. I included a picture of where that became an issue.