Waves LED strip handler modular (WLED)

DIY waves LED strip wall handler. Chain/combine waves. Modular so you can customize as you want. Used with WLED
25
32
0
490
mis à jour 4 juillet 2024

Description

PDF

 

You will find 2 kinds of components: bodies and diffusers.

Bodies

One wave is made of 5 body parts:

You can create different types of waves, adapting to your wishes. For example, part 3 can be removed, it will change the kind of waves as shown in the pictures.

You will find several versions of the body parts:

  • Body X: you can plug parts on the right and/or left of it
  • Body X edge: it finishes or starts, you can't plug anything after or before
  • Body X edge with hole: same as edge but with a hole to pass cables inside for the strip LED

 

Bodies are pluggable together with holes to screw into the wall:

To link/clip them together, you'll have to force a little bit with an object like scissors on the edges.

Diffusers

There is only one kind of diffuser per body part. So 5 in total. It will clip properly in the body with a strong pressure, but easily allowing you to add and remove if needed.

Note: I've done several tests with the distances between the LED strip distance with the diffuser and the diffuser opacity to find the best rendering.

Print recommendations

 InfillMaterialLayer height
Bodies15%PLA or PETG0.2mm
Diffusers15%Transparent PETG0.2mm

No support is needed!

Used components

Tags



Origine du modèle

L'auteur a marqué ce modèle comme sa propre création originale.

Licence