Raised Bed Sprinkler

A simple and small sprinkler i made for my raised bed.
Video: https://youtu.be/ph-5ruPQspw

The diameter of the hose connecter is 7mm. So a hose with 6mm inner diameter should work fine. I used an ordinary pond pump and it doesn't require a lot of pressure to work.

The pole should print fine without supports, as the required bridging is quite short.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.