Warrant Officers - Bars/Blocks (USMC/USN/USCG)

Warrant Officer rank insignias of WO1, CWO2, CWO3, CWO4, and CWO5 for the USMC and USN to print and have fun with!
13
77
0
440
updated March 9, 2023

Description

PDF

For the “Whoa-Club” that navigates in the gray of the USMC!

Can be used for the US Navy and US Coast Guard Warrant Officer ranks by using a different color for the blocks.

If using an FDM Printer, in particular using PLA, I recommend resizing the blocks to 98.5% so it can fit snug/tight without using glue.  In my opinion, it just looks better to insert it tightly than to glue it in.

To insert each block inside the space on its designated bar, you'll need a rubber hammer and a very small (watch type) hammer with a with flat-surfaced center punch.  The rubber hammer for the center and the small hammer to seat it properly at each corner.  It doesn't take long at all if done right.

Using a SLA/LCD (Resin) printer for this design is highly recommended because it comes out smoother and the blocks inserts nicely with using any hammers or tools.

Tags



Model origin

The author marked this model as their own original creation.

License