GRIP CLIP Belt Clip

GRIP CLIP belt clip is a clip that can be attached to any hand tool in lieu of a bulky tool belt or complimentary to a tool belt for bulky items such as a pry bar or anything else that typically falls out of a tool belt.

The integrated swivel lock allows the tool to hang freely and pivot while not actively in use. To use the tool, simply rotate the tool 90 degrees while sliding out of the belt clip. When finished using the tool, you can slide it back in by aligning the slide lock to the groove in the belt clip - that easy!

Tools are affixed to the clip with a flexible strap that is weaved in the clip attachment and can be adjusted to fit the size tool you are using. (The tighter the strap the better). No more dropping & mis-placing tools while you work.

I've personally tested this with a 20-oz hammer, large pry bar, small pry bar, cell phone, screw drivers, tin snips, Spackle knife and more and it works perfect without issue!

Print instructions

Belt Clip and Clip Attachment can be printed in PLA or ABS.
Clip Skin and Strap to be printing in Ninja Flex filament.

Recommend print fill for belt clip and clip attachment to be 33%.
Recommend printing belt clip and clip attachment to be oriented such it prints upside down so no support is needed.

Recommend printing Ninja Flex with fine printer settings,
Print slow @ 20 ms
Temp settings set to @ 230c