A fully 3D printable formicarium (ant nest) that expands to grow with your colony.
This project is described in full here: https://youtu.be/kuLnrrM9C5c
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
varies
Filament: X3D PLA white/dark colour
Notes:
Print one of each part except for the port (x2) and trap door (x3). All parts are correctly oriented.
Most parts can be printed with standard settings, except for:Assemble with M3 bolts.
Acrylic/glass should be cut to 84 x 84mm and be 3-4mm thick.
Designed to suit 20mm test tubes and 20mm tubing. I used tubing that was marked as 16mm but the external diameter was actually 20mm.
The author marked this model as their own original creation. Imported from Thingiverse.