@Ben_248894 Print the parts in the main folder except these that are in the optional folder: hinge-right-for-4mm-panels-print-2pcs-1.6.3mf and support-under-glass-for-4mm-panels-1.6.3mf. So obviously don't print the normal "right" hinge and support under glass.
@Ben_248894 Ah yes the designs for those thicker lids were requested, it's basically just a little bit taller corner panels so the top glass doesn't stick out too much. If you use 4 mm panels all around you can use the 4.5 mm version if you like.
@humebeam many thanks for your helpful replies. I sourced the screws today. I was confused by the screw name (hex bolts / socket head). Do i need the screws with the cylinder heads, or hex bolt, or both? Will post a feedback if everything is done and will donate.
Hello,
I would like to use 4mm thick PC panels on all sides.
Do i have to print the variant for 4.5 or 6 mm lid)?
@Ben_248894 Print the parts in the main folder except these that are in the optional folder: hinge-right-for-4mm-panels-print-2pcs-1.6.3mf and support-under-glass-for-4mm-panels-1.6.3mf. So obviously don't print the normal "right" hinge and support under glass.
@humebeam ah great. I was confused by the folder "alternative-printed-parts-for-4.5mm-lids".
When shall i print the part in the "4.5mm-lids" folder?
@Ben_248894 Ah yes the designs for those thicker lids were requested, it's basically just a little bit taller corner panels so the top glass doesn't stick out too much. If you use 4 mm panels all around you can use the 4.5 mm version if you like.
@humebeam many thanks for your helpful replies.
I sourced the screws today. I was confused by the screw name (hex bolts / socket head). Do i need the screws with the cylinder heads, or hex bolt, or both?
Will post a feedback if everything is done and will donate.
@humebeam check out this video. Might be helpful for other and for the description.
https://youtu.be/MCfoBPbHjUk