I modified the model so i can use it on my ender 3 v2 without needing a longer belt. Since it makes the motor sit more to the center of the printer i installed a larger motor to utilize the added clearance. I printed it initially in PLA infill 40% but reprinted the mount in ASA infill 40% recently. I reprinted the mount so i can run the motors hotter.
I used PETG HF Translucent. Perfect print the pin cover even turned out flawless!
Note: this seems to be for a carriage with 20mm hole spacing. The creality rail kit that I got was unfortunately 15mm hole spacing. Hope this saves someone some print time, otherwise the model looks good!
Nice able to fit my Omron inductive probe too bad my petg is wet need to reprint
Nice Design! My only suggestion is to tweak it so the clamping bolt is accessible through the side "windows".
@tcbp glad you like the model, thank you for rating it :)
Prints well on superdraft settings.
Fits nearly perfectly for use with a wooden board.
I have 8x4 magnets. I was hopeful they might fit slightly in this, but I couldn't get them to work. Soooo close! I'm not familar with how to edit Step files or CAD just yet. So I'm at the mercy of finding things that people have already modified.
View 2 more comments
@trajesus oh wow!! Thank you so much! You rock! I was taking a small exacto knife and trimming and trimming without much luck. Can't wait to print this now!! Thank you!
@NewShockerGuy_83265 hope it fits now and you like it :)
Ruthex brass inserts case - perfect fit; excellent design, thank you for that for sure!
Printer: Prusa Mini+ with Input Shaper; 0.15 layer height; 0.4 nozzle; 50% infill Gyroid pattern; no top layer since I wanted the infill pattern to show.
20-30% Gyroid infill with no top layer would have been a good visual texture look also.
Thank you for printing, I’m glad you liked it🙂