Thanks for sharing. Fits perfectly after applying some force on the corners.
Printed with PETG which had a bit of moisture so the poles that go into the holes had some artefacts making it a bit difficult to fit. But I ended up getting it all in and it looks great :)
Thanks!
Thanks for making the model public. You should try adding some custom supports where the ports are. they work very well with TPU .2mm thick with a .1mm gap all the way around they peel right out. I would ad the myself but it's hard to do without the step file. I added a pic of one of my own designs to illustrate what I'm describing.
Printed in TPU.
The case perfectly fits onto the Flipper and keep him safe.
This is the v1 but it's very strong on the Flipper so I reprint the v4 now.
Thank you for the design AND the continuous updates and improvements. Truly 5 stars, Cheers!
I wanted to upload a Remix that works, but printables.com tells me my .3mf file (right out of Prusa Slicer 8) would be "damaged". 3mf is listed as a supported file format...!
I had to resize the collet to 90%, otherwise it would not fit into the buffer of the MMU3. After that, I had to "drill" 4.2 mm (adding a negative cylinder in Prusa Slicer) so the PTFE tube would fit. Voilá. Not perfect, but it fits (as long as there is a tube in the collet, the collet will hold in the buffer).
One tip: Do not print in PLA (too brittle). I has success with Prusament PETG. (edited)
