Giantarm clear PETG
Gratkit Triple PLA Silk Red/Green/Blue
0.2 layer generic PLA/PETG profile
Looks cool on a friends Desk for keeping cards & sticks in place and prevent them from getting lost.
May you upload an .stl file without the ankermake sign?
Would love to print that, but seems usless to print ankermake while printing on a K1..
@WeaponizedTOA_952595 Love it! The color is super cool! Thanks for your sharing. (edited)
Are the Tank Treads (tracks) fixed on this model? The one I printed from Ankermake app had treads that didn't fit into the cogs of the wheels.
@Hunteil_725932 mine didn’t fit either. I used pla+ filament. Does that make a difference?
Dice variant (which is only different based on the numbers on the face) that Anker remixed on their website and is freely available for download.
Printed with a brim because the piece that attaches to the hammer has poor contact with the bed.
Sliced in AnkerMake's reskinned PrusaSlicer with gyroid supports at 10%. Feels sturdy.
Probably need to tune my printer but this seems pretty cool to me.
Simply wow! Very cool castle with lots of detail. I printed it out of white and it really looks good (see pics). You'll also notice that I cut off the pedestal because I was able to print the model a bit bigger and I like it better anyway without the pedestal.
Printed well overall. I’ve had some issues with a foot falling off, it could just be my settings though.
Printed on a smaller scale, the print is fragile as intended, but it will fulfill its function very well. (I tried a custom eye spray painting after the print) (edited)
Where is this supposed commercial license on MakeItReal?
hello , the dragon printed fine, until i wanted to take it off the buildplate then some parts where not connected. do you happen to know what the error is? otherwise a very good design!
