Perfect box to expand the einsy hole and for the wiring to be completely hidden in the electronics box. Everything fits perfectly and easy to print, I made a change to the cover and put a big bear for my personalized MK3s BEAR
Great model!
I had to scale down the screw to 98%. I am actually somewhat sure that my printer is not dialed in very well tuned in for dimensional accuracy.
With the C920, did you figure out any tricks to make visible area bigger? I can't quite get the entire bed visible. I suppose i could try mounting the webcam higher in the cabinet.
Thanks for posting this :)
View one more comment
I think that I will try, but I'm busy and I don't know when I'll can do it
@Resin_Chopper I think I figured it out - I mounted the camera at the top of the cabinet. Now I can't see the nozzle at all - but I can see the entire bed :)
Scaled the screw down to 98% as suggested in the comments, still a bit tough but I'm guessing that's down to being new to 3D printing. Printed in Prusament PLA, holds the camera up great and provides a pretty good view!
Printed with Polymaker PolyTerra PLA Fossil Grey (215° and 56°) and with Prusament PETG Galaxy Black (230° and 80°). (edited)
Hi,
thanks for the model.
I've just printed the part but, I wasn't satisfied with my print, I was a li'l lazy in preparation of the file, and so I had to reprint with support.
You can see the differences. At least it fits.
@H3Dtisk_49109 thanks a lot
Hi,
the cover didn't fit for the MK3S+ model, because the clearance for the circuit board of light barrier is too short. (I'm aware that you never wrote it will fit ;-) )
But it's a pity because your idea is good.
Best (edited)
@riethmueller I'm sorry but the fs cover for + model is different, in the title I wrote mk3\s ... Anyway, is not so difficult to make it fittable for mk3s+, I'll do it in the next days and I'll be glad if you'll wanna test it
Just what I needed. (edited)
Excellent... works as expected...