cool print, but can you link to the small tea lights that will fit
@Greg_640732 it is designed to fit almost any tea light by default. Most should work.
Having issues with balance and stability. Single attachment point makes the holder prone to tipping side to side. Even when balanced, the album has a tendency to lean forward against the name plate.
@RyanSchomber_320249 As far as balance, the design was intended to be used on 16" separation to put screws directly into the studs. This was intended to allow tightening to the point that the mount would stay level. I can however simply add an additional screw hole to allow for stability. As far as the records leaning against the plate, I will have to give my design another look and see what can be done. Thank you for your feedback however! I will use it to improve!
I made my own TTPD plate using the blank. Printed for a friend, only change I ended up making was sizing the wall mounts to 99.5% as they were a little snug for me. It might have just been a filament problem.
Coated with XTC from smooth-on after printing for added strength and paintability!
If this is for the Tesla M3, suggest you add the word Tesla to the title so owners searching for Tesla accessories will find it. If not for the Tesla, just ignore this.
@IraS It was in the tags, but I added it to the description too. Thank you!
These are really really nice, and very solid. I printed them and use them and they work perfectly. If you were to tweak this... 1) I would allow to leave the metal plate on the base on for rigidity (I leave them on). and 2) Make the arm/dovetails twice as thick for a bit more strength.
@tbids_96585 Thank you! I will see about increasing the thickness!
Hi did you fix the fan to fan 2 port? if yes is it a 24v port?