Great addition, thanks
For what the A1 Mini allows for custom mounting points, I think the mounting is quite well made, despite the Bambu lacking any good mounting points.
I opted for normal M3 screws and used 6x M3x16 Screws and 2x M3x10 screws. In the picture of the bottom view I marked both M3x10 screws, as the ones Bambu puts there are not self-tapping like the others, and it is harder to put a screw there properly. For the rest of the screws that replace the self-tapping ones, M3 works great, just make sure to use 16mm long ones so they get a proper grip.
For the squash balls I recommend getting those with two yellow dots on them, as they absorb the most energy, which is the best choice for these kinds of feet. There are supposed to be squash balls with one orange dot which are even softer, but I couldn't find any.
The squad balls fit nicely into the designated spots and shouldn't come out unless you really pull on them, so that should be safe for transport.
I used PETG with 0.2mm layer height, 4 solid bottom/top layers, 4 walls and 40% gyroid infill. This gives those parts the needed strength and durability. PETG should be a better choice than PLA because it doesn't crack as easily and also has bit more flex to it than PLA, which means it also absorbs vibration a bit more.
To the author: I found your documentation lacking a lot of detail, so feel free to use my uploaded pictures and information if you want to.
Thanks for the great design!
Modified the file to fit the 100% sized dummy 13 and made it where you can use 6x2mm magnets.
I also scaled these down to fit the original size Dummy 13 but am using 6x3 magnets. Thanks for this model its great
This is the upgrade we all need. Bambu needs to make this a thing. I have a p1p updated to a p1s so I had extra vibration feet as I had already purchased some before I got the kit. This is PERFECT!
Great job, the only one of many attempts that actually worked. It is now much quieter and there is no impact on the printing quality!
In combination with an additional 4 TPU pads for my Ikea Lack table, everything is now as it should be. (edited)