HugoWhite 17
HugoWhite
@HugoWhite
published a new model February 19 at 10:09 PM
February 19 at 10:09 PM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model January 6 at 4:49 PM
January 6 at 4:49 PM

I scaled the width to 40mm so it would fit my larger triangle picks. I have various Dunlop Ultem picks .45 to 1.14, the 1.4 tone whatevers by Dunlap. Also my Blue Chip TAD 40 fits in there just fine as well. I like this one, printed with Polymaker Silk PLA and added fuzzy face or whatever it is called just because. Lid I noticed was a bit looser with v3 over v2, making it a bit easier to open. Thanks for this one!

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model December 2, 2024 at 11:13 AM
December 2, 2024 at 11:13 AM
1

Great model. I printed mine in PETG and had to add a brim.

But this is the best foam cutting/lagging tool on the internet right now.

Thanks, man! That means a lot to me. Really appreciate your support!

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model November 29, 2024 at 11:40 PM
November 29, 2024 at 11:40 PM

Very good design, and thanks for the different lengths! In the future, other thicknesses could also work for dufferent kinds of drainages, please consider those. All the best :)

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model November 22, 2024 at 7:50 PM
November 22, 2024 at 7:50 PM

Velmi hezký box. Pro větší trsátka je nutné box ve sliceru zvětšit na 125%. Děkuji.

Thank you for sharing. Great stocking stuffers!

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model November 3, 2024 at 11:15 PM
November 3, 2024 at 11:15 PM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model October 31, 2024 at 5:06 PM
October 31, 2024 at 5:06 PM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model April 5, 2024 at 9:03 PM
April 5, 2024 at 9:03 PM

ik heb er een svg afdruk mee gemaakt

@LudoB Nice. Bedankt voor u beoordeling en foto

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model March 31, 2024 at 11:28 PM
March 31, 2024 at 11:28 PM

Can you tell me the difference between the Filter mount-cutout 96mm and the Filter mount - Handle -cutout STL Handle files other than one uses less volume and has more triangles?

@Stormcrow_2602180, great question!

The Filter mount - Handle -cutout STL Handle version is designed for the 3D-printed handle, which you can also find in the files. You just need a heat insert to add a thread.

The Filter mount-cutout 96mm version is made for a pre-made handle with a 96mm spacing between mounting points. I personally bought a metal handle with that exact spacing, as it's quite common in my area.

I created the STL version because not everyone can find a handle with the same size I used.

If you have any more questions or need further clarification, feel free to ask!

@Cas_v_d_M_1757290 Great to hear. If you have any questions just lemme know...

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model March 30, 2024 at 8:46 AM
March 30, 2024 at 8:46 AM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model March 23, 2024 at 9:57 AM
March 23, 2024 at 9:57 AM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model February 16, 2024 at 3:13 PM
February 16, 2024 at 3:13 PM

Prints niche wit 80 % Infill

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model February 3, 2024 at 9:27 PM
February 3, 2024 at 9:27 PM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model February 3, 2024 at 10:31 AM
February 3, 2024 at 10:31 AM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model January 13, 2024 at 7:03 PM
January 13, 2024 at 7:03 PM

Fits nicely even with fast 0.24mm Layer Height

Awesome looking case, will do nicely for my 3D printer enclosure!

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model January 8, 2024 at 4:39 PM
January 8, 2024 at 4:39 PM

Added mounting tabs for mounting on the lid of my LACK enclosure. Thanks for the clean design!

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model December 10, 2023 at 9:15 PM
December 10, 2023 at 9:15 PM

Ctrl + Enter to send Enter to add a new line
HugoWhite 17
HugoWhite
@HugoWhite
published a new model December 10, 2023 at 5:49 PM
December 10, 2023 at 5:49 PM

Fits BTT Pad7 ADXL345 perfectly. Looked close to what I needed to mount to my ApolloLander when mocked up in fusion, but unfortunately didn't fit...no issues with model, just not cross compatible for my application.

@TexasRed_1430882 Unfortunate that it doesn't work with your application. I've added the Fusion 360 CAD file, so it should be easier to tweak now. Thx for your review (:

Ctrl + Enter to send Enter to add a new line
All items loaded