Have added a new V-Spooler clamp for the new Sunlu spools over on the new V-Spooler Common Options page.
https://www.printables.com/model/1267055-v-spooler-common-options
Following on from X, the original V-Spooler now has a Large Bed Edition published and preconfigured for Prusa XL or Bambu H2D.
https://www.printables.com/model/684376-v-spooler
After a brief testing period V-Spooler X Large Bed Edition for Prusa XL and Bambu Lab H2D has been published to the V-Spooler X model page here https://www.printables.com/model/868222-v-spooler-x
The V-Spooler & V-Spooler X for large format printers club preview has been updated with some fixes, and instructions for both versions. https://www.printables.com/model/937929-v-spooler-v-spooler-x-for-large-printers-preview-2
Thanks to All3DP for having me as their featured designer this week. We touch on how I design things, my current favourite CAD software, printer (hint: it's a Prusa) and a few other things! https://all3dp.com/2/designer-spotlight-fyrby-additive/
Fine for my application. Do not expect a tight seal. :) Thank you for sharing.
Have just updated my 100mm pipe splitters with 2 extra alternatives, freshened up the page and also added Prusa XL ready files.
https://www.printables.com/model/521209-y-connectors-for-100mm-pipe
The V-Spooler motor modification has been revised to v2.0. This is a re-design based on the much nicer looking V-Spooler X motor mod that also strengthens various parts of the model. Enjoy!
https://www.printables.com/model/1069023-v-spooler-motor-mod
Im soo glad you took the time to make this mod. that motor torque is insane. I was having issues with the other system not having enough power to turn the spools
Thank you! Glad you are happy! :)
Prints well in Prusament PETG using organic PETG supports from bed only, with support top contact Z distance increased to 0.2. I suspect this model would also work very well in ASA.
I thought about printing it with BVOH supports, but the supported surfaces aren't all that functionally important in this model. A couple tenths of an mm of "sag" from the necessary Z distance for a same-material support just doesn't matter here.
I've noticed that many of your models use PLA supports with PETG, but IMO the resulting low bed temp and loss of adhesion creates more hassle (in the form of brims that have to be trimmed etc) than the more accurate and easier-to-separate supports fix.
My $0.02 FWIW. I'm a happy subscriber in any case. (edited)
pas réalisé mais gros avantage sur la fin de bobine 2m de dépose supplémentaire ce qui est pas négligeable et une plus grande facilité a charger le fil , car les micro sont pénible a passer surtout avec du TPU >> GRRRRRR<<