Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model January 17 at 1:24 PM
January 17 at 1:24 PM

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model October 7, 2024 at 11:39 AM
October 7, 2024 at 11:39 AM

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model October 7, 2024 at 11:27 AM
October 7, 2024 at 11:27 AM

Thanks for the model! I remixed a debris bucket for 12mm wide nozzle brushes with 12.4mm cutout, including a version for this nozzle scrubber, but have not been able to test it yet: https://www.printables.com/model/1061743-debris-buckets-for-prusa-xl-3030-profiles-and-10-1 (

Seems to me, that the brushes ar not touching the nozzle. I think I've to print some spacer.
Also one of the bins broke while ataching. They are quite tough.

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model October 7, 2024 at 8:31 AM
October 7, 2024 at 8:31 AM

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model March 7, 2024 at 5:56 PM
March 7, 2024 at 5:56 PM

Great idea! These will be very helpful.
Pic is right off the print plate so excuse the stringing. They actually printed well. I had an issue with the white filament that messed up those so I have some work to do with settings.
Thanks for sharing your model!

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model March 2, 2024 at 6:07 PM
March 2, 2024 at 6:07 PM

Question do I have take somthing off the orginal design or can this go over the orginal deisgn ?

@BklynJoe84_664320 this is the original design with the number, sorry for the delay on reply

Printed well, fit well and work great!

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model October 30, 2023 at 10:58 AM
October 30, 2023 at 10:58 AM

Ctrl + Enter to send Enter to add a new line
Franck - 3D Print Concept 10
Franck - 3D Print Concept
@FranckBald_171294
published a new model October 29, 2023 at 4:12 PM
October 29, 2023 at 4:12 PM

Printed the 24, turned out great. The bottle slots are absolutely perfectly calibrated for speedpaints, but the bottle of Vallejo in the front fits a bit snugly. Might be worth printing at 101 or 102% if you are printing for a rack full of Vallejo droppers. All in all, though, perfect solution for a real problem I have.

That said, while this solves my organization problem, this further fuels my addiction: I'm off to order some more speedpaints and print another copy of this amazing paint dropper rack!

Love this Model! Great way to get rid of low spools and fits the army painter and Vallejo bottles perfectly.

@Csugg34_189179 Indeed, this model is greedy in material.
But practical to use.
You have a beautiful collection of paint.

Ctrl + Enter to send Enter to add a new line
All items loaded