Love it 😀 😀 😀 😀 😀
The included instructions do not work. Pin PA6 is used already. What else can I do?
Update: I used the following settings using the stock mainboard + Sovol Klipper addon, and it worked:
[bltouch]
sensor_pin:^PB1
control_pin:PB0
x_offset:30.0
y_offset:0.0
speed:20
[safe_z_home]
home_xy_position:120,152.5
[bed_mesh]
mesh_min:30,5
mesh_max:295,300
I don’t know what effect this will have on other users, but this is what worked and I’ve been printing perfectly ever since. (edited)
Be awesome to see something made for the Klicky probe or the one from Klackender.
I combined this print with a 120mm fan adapter (also printable) and it works great! All the holes lined up and it fit perfectly in my SV06 Plus.
I printed on normal settings (0.15mm resolution)
How did you get this screen to work with a Stock SV06 Plus? Did you have to change something in Marlin?
@soulreaper333_235928 I'm sorry - should have mentioned that I did a board swap. I doubt the stock board has an SPI interface.