Got tired of cheap ptfe quick connecters wearing out and wanted something that would allow the ptfe tube to pass through so its all one piece instead of 3 pieces. It uses two spare screws that come with the mini.
You will need 2x M3 screws at least 20mm in length. The mini comes with a spare 20/40mm screw so I’ve used them. The 20mm screw is screws all the way and with the 40mm screw just make sure you can’t see the threads anymore.
When threading in the couplings don’t over tighten them. Finger tight will be enough, once the m3 screws are in the couplings won’t loosen or twist out.
The author hasn't provided the model origin yet.