Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly to shop vac.
I have created several Pillar Drill clamp sizes, so hopefully one will fit.
I would recommend printing with 8 Mid Link, plus a Start Link and End Link, to give maximum flexibility in the design. After printing, I would recommend lightly sanding the parts to remove any lumpy bits before assembly. Also a little PTFE lubricant can help.
There are two funnel attachment options for various purposes (see images). These should all be printed with the hose end to the bed. A 5mm brim is a good idea and the ‘Encapsulated Funnel Attachment’ will need support.
Some printers may print links looser than others. For this reason I would recommend doing a test print first, if you find the connection too loose it maybe worth looking at your print settings.
This was printed with Hatchbox Blue Grey PETG. I would recommend printing this print PETG rather than PLA for increased durability.
I hope you find this model useful. If so we would love it, if you can give us a LIKE. You can also follow us on our YouTube Channel here. |
Autor zremiksował ten model.
This is essentially a brand new design, but inspired by teslapunk, differences include: