CPAP Hose Coupler made parametric using Fusion 360 so it will fit your hose.
4h 24m
2× pliki do druku
0.20 mm
0.40 mm
41.00 g
41
140
3
909
zaktualizowano 20 sierpnia 2021

Opis

PDF

Coupler for keeping CPAP hose together so it doesn't come unhooked in the night.  Also likely good for extension cords or any other connections in need of reinforcement.

Separate variables for:

  • Internal length
  • Overall internal diameter
  • Separate variables for slots on each end to allow for mismatched hoses (cords)

 

V3 is a open side cylinder, stronger but bulkier

V4 is open on both sides and slots are from opposite sides

 

Recommend opening in Fusion 360 and modifying variable to meet your application

 

Supports recommended, though bottom side will be rough.  See PrusaSlicer photos for recommended orientation. Rotate Y -90 degrees to match.

Tagi



Pochodzenie modelu

Autor oznaczył ten model jako własne oryginalne dzieło.

Licencja