AM8 Bear Extruder X Ends

This is a remix of the amazing Bear Extruder for the Prusa machines. It was designed to fit the spacing that the Anet A8 and AM8 uses and their Z rods/screws.

This remix uses the standard length X rods from the A8/AM8, but the spacing on the X axis rods uses the standard Prusa spacing. This means you will need to use a Bear Extruder with this, found here:
0.6.0 alpha https://www.thingiverse.com/thing:3226689
0.7.0 alphs https://www.thingiverse.com/thing:3716110

I no longer suggest printing this in ABS as it tends to shrink. Use PETG or PLA unless you are able to accurately account for your ABS shrinkage.

FIXED 11/18/2019
Tested and working on my AM8

Print instructions

Category: 3D Printer Parts Summary

This is a remix of the amazing Bear Extruder for the Prusa machines. It was designed to fit the spacing that the Anet A8 and AM8 uses and their Z rods/screws.

This remix uses the standard length X rods from the A8/AM8, but the spacing on the X axis rods uses the standard Prusa spacing. This means you will need to use a Bear Extruder with this, found here:
0.6.0 alpha https://www.thingiverse.com/thing:3226689
0.7.0 alphs https://www.thingiverse.com/thing:3716110

I no longer suggest printing this in ABS as it tends to shrink. Use PETG or PLA unless you are able to accurately account for your ABS shrinkage.

FIXED 11/18/2019
Tested and working on my AM8

Print Settings

Printer: AM8

Rafts: No

Supports: No

Resolution: .20

Infill: 20%

Filament: Any PETG