Articulated Christmas Dragon

The body moves freely around ✓ The legs move up and down✓ The tail moves freely around ✓ The head moves freely around ✓
3606
19 k
204
74 k
zaktualizowano 20 lutego 2025

Opis

PDF

Hi everyone.
I'm P1lotz and I am a Danish student, and I really like to make 3d models. This time I have made a Christmas articulated dragon, for Christmas. It is supposed to have a red stripe like a candy cane :) I didn't paint the stripes for all of the dragons I printed, because in my opinion, it looks pretty cool without the stripes too. 

Check out morph-colored filament by FormFortura, for colorful multicolored filament, for colorful multicolored filament.
The filament used in this project is from a Danish company, but FormFortura provides similar filament, in many other colours.  

Video:

The dragon is inspired by a candy cane, a reindeer, and the ice dragon I uploaded to Thingiverse in May, which got a lot of positive feedback from all of you guys. The antlers on top of the head and stripes on the side can be painted in other colors, for example, brown and red, to make the dragon more Christmassy. The colored one on the thumbnail is not what the dragon was supposed to look like, as I said earlier that it was a candy cane, but I just really liked the red, green, and gold colors, because it's Christmas colors (it is indeed in Denmark).

For context here is a picture of the painted Christmas dragon: 



The body moves freely around
The legs move up and down
The tail moves freely around
The head moves freely around
The Dragon can be printed in one piece
No support needs
 

Variations
I have made 3 different variants of the model. A really long one, that takes around 16 hours to print (on an Ender 3 pro), with 70 joints (two of them are double joints), and a little shorter one that takes around 12 hours (on an Ender 3 pro), with 35 joints (two of them are still double joints), and a very small one, with 35 (and again two of them are double joints), that takes around 6 hours to print (on an Ender 3 pro).

The long dragon model is 56.5 cm long aka around 1 foot 10 inches in American measurements.  
The short dragon is around 39 cm long, so right around 1'3 feet.
The extra small dragon is 27.5 cm long so around 11 inches in American measurements.  

The whole dragon is printed in one piece, so no need for glue and that kind of stuff. It also doesn't need support at all. You can see how it is printed below: 

Print settings 

  • The dragon does not need much infill. I recommend between 10% and 20%, but 5% works as well.
  • The dragon does not need any support for printing.
  • The dragon can usually be printed directly on the printing bed. If any troubles occur, I do recommend printing with rafts. 
  • I advise avoiding using adhesion while printing the model and instead using rafts to avoid problems with articulation.

 

Information about Commercial license

If you're interested in obtaining a commercial license for my dragon design or any of my other creations, consider joining my printables club. As a member, you'll have the opportunity to sell physical copies of all my models, provided that your membership is active. Join today for just $8 per month to secure your license and support my upcoming projects. Thank you!

 

Designing process 

The model was created using Blender 3D. I am currently working on a detailed tutorial that will explain the design process, so stay tuned if you want to learn how to create your own model. In the meantime, you can watch an older tutorial I made, although it is less detailed than the upcoming one. Click here to watch the older tutorial.

Similar models

Articulated Christmas Dragon

Articulated Gothic Dragon

Articulated Turtle

Articulated Demon Dragon

 

Help me out

If you’re interested in helping me out and enabling me to upload more free models, you can support me through donations on PayPal or by joining the supporter tier of my Printables Club. By joining the club, not only will you be supporting my work, but you will also gain access to exclusive models.

 

If you have any ideas for future projects, please feel free to send me a message. I always appreciate a bit of inspiration now and then. Additionally, if you have better photos of the model, you can upload them either as a make or for me to use as thumbnail images. Thank you!

 

Copyright

This model is entirely created by me. You are not allowed to sell or reupload it without my permission. I often see people re-uploading my models, which is strictly prohibited and violates copyright laws. If you come across anyone uploading my designs, please reach out to me on Printables or Thingiverse. Selling this model may be permitted under certain circumstances, such as through a membership.

If you have better pictures, feel free to upload them, so I can use them for the thumbnail, thank you.

 

Tagi



Nagrodzony w konkursie


2022 Holiday Decorations
2495 wpisów | 24 listopada – 31 grudnia 2022

Pochodzenie modelu

Autor oznaczył ten model jako własne oryginalne dzieło.

Licencja