three designs for christmas ornament spheres
1959
7473
65
36 k
zaktualizowano 20 listopada 2024

Opis

PDF

christmas ornaments

three designs for christmas ornament spheres

 

dimensions in mm: ~76mm diameter

 

there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside, however if you'd like you can always enable tree supports only for that center section

in order to assemble, firmly but gently “massage” the connector into the first half until it's locked in position, then you can just push the other half into place, don't use excessive force otherwise there is a risk of cracking at the patterns

 

photos show printed in silk and metal pla and the connector in black matte pla (as i printed multiple at once)

  • .40mm nozzle
  • .16 layer height
  • seam at back
  • 10% gyroid infill
  • detect thin walls

notes

  • includes bambu studio 3mf file and STLs
  • all photos uploaded are of the actual printed model, and are copyright protected
  • if you enjoy this model please consider to buy me a coffee
  • commercial licence membership available on my patreon

Tagi



Nagrodzony w konkursie


3
Winter Holidays Decorations 2024
2431 wpisów | 1 grudnia – 1 stycznia 2025

Pochodzenie modelu

Autor oznaczył ten model jako własne oryginalne dzieło.

Licencja


Wyróżnione modele od twórcy

Pokaż więcej