Scales for Moki picks. I made them a bit thick and similar dimensions to my other pick handles—12mm tall, 8mm thick (total, with 0.5mm picks), and ~110mm long. These use standard bolts and hex nuts rather than the binding barrels that most use. This means that there is a bolt side and a nut side. The bolt side has a choice of a flat recessed boss or one for a tapered flat-head sunken bolt. The nut side has a choice of standard 3.2mm thick nut or a 2.2mm thin nut. Photos are of M4 8mm tapered bolts with M4 3.2mm nuts.
You can pick up a set of metric bolts and nuts at many hardware retailers. In mine 8mm was the shortest length, but some sets go to 6mm or you can get 6mm individually.
2024-06-26 Added 6mm thick scales (total, with 0.5mm picks). Only the standard bolt side (with boss) and thin nut side work at this thickness.
2024-11-10 Added V2 with grooves intended to increase stiffness. Also added thin and thick versions for stock Chicago screws. Print two copies for those as they are the same for each side.
The author marked this model as their own original creation.