Name: CREALITY K1+K1C LID RISER V2 [50mm height]
Brand: Printables
SKU: 890518
Rating: 4.9090909091 (239 reviews)

0

Hugo Vinicius

@HugoVinicius_3092478

Hi! Hows going, mate? I reeeally liked your design but I dont have easy acess to not even a M3 Nut in my country! The cheapest one I could find would cost 3 dollars a piece ("in this economy???"). So I was wondering if I could print and use the design and keep everything in their stock place. The filament sensor and the chain. I am only looking for the ventilation and more room for the PTFE tube to move. Would it be possible to do that? If not, do you have a design of your own that I can use keeping everything stock?
Thank you so much for your time!!! Wish you the best <3

13

LEOTE [approach]

@LEO_app

@HugoVinicius_3092478 Hey! I'm working on new projects for our printers. 😉 Thanks! You can use this back wall - [a]_x1_WALL_V2_BACK.stl. However, you'll need to use bolts with the hinges. You can use a regular nut if you prefer, but the bolt must be longer.

4

Dean Stotler

@Delaware3Gun_857990

Great design and upgrade for my K1C. Printed in PET-CF and ABS.

13

LEOTE [approach]

@LEO_app

Looking really good!!! Thanks for sharing 🤩

13

MrTejuino

@MrTejuino_1327593

o dont know if it only me, but i dont can put the led housing in it place, has like 4 mm of gap between the riser and thes things, i dont know how to put it well, due it make out squere all the riser

12

Tony Castineira

@TonyCastineia

It took a while to print but what a problem solver this is!!
From factory it just scratches the plastic lid like crazy with every print.
after i installed this no more scratches! i love it.
and now it has a hinge for the lid as well !

13

LEOTE [approach]

@LEO_app

Thanks for sharing your experience and final result. 🤩

9

Snafu3D

@Snafu3D_144892

Party in my K1C
I went a bit crazy used an old ARGB kit I got for my Computer
printed the Vent in Transparent

13

LEOTE [approach]

@LEO_app

Thanks for sharing the final result!!! Great 🤩

S 3

Shakall

@Shakall_2740696

I have the problem after printing that the screws on the corners don't fit. I'm missing about 2mm for the screw to fit properly. I printed with PETG and I think the shrinkage on the PETG isn't right. Do I need to set something? Shrinkage XY and Z to 101%? (edited)