The author remixed this model.
I remixed this model, because the one from CoolBlackCat occupied a little the surface from the printbed, so I had to be aware of it when slicing things. Another problem was, that at the beginning when the printer calibrates, the cable from the extruder pushed my camera down, so I couldn't see nothing.
The original Model are:
Camera mount from ian123411
MK3S PrusaLink RPI Camera holder from David
Now the Mount is mountable on the frame (See pictures), it will not occupie the printbed and the extruder will not touch it. I use the rPi Camera v3 NoIr wide and 30cm long cable from the Zero W to the camera (you have to use a different cable for the Zero W)
Print Instructions:
25% Grid Infill
Organic Support
For support enforcers only (Draw only at overhangs)