BTT U2C Mount (DIN Rail)

Mounting bracket for the BigTreeTech (BTT) U2C CANBUS Board for mounting on DIN rails. The bracket is attached to the Voron DIN Clip (GitHub Link) with 2x M2x10 self-tapping screws, while the board itself is attached with 4x M2x10 self-tapping screws. The lines next to the two holes on the adjustable model indicate the holes used for centering the mounting board on the clip, whereas the remaining holes are for adjustment (in case you want to mount it off-center). The fixed model is only able to be mounted centered. The model prints with the standard Voron settings, which are as follows:

• 4 walls
• 5 top/bottom layers
• 40% infill
• No support required