Mycroft, OVOS, or Raspberry Pi Case with monitor mount

Update: I made some modifications to the front portion and reworked the frame to make everything fit together a little better. The frame now prints as one large piece; longer print time but cleaner overall.

A case for a Raspberry Pi 4 and 7" Touchscreen monitor for Mycroft, OVOS, or similar projects. 

Print the three pieces and assemble with threaded inserts and M3 screws (see below). I left all screw insert holes in place for more customization options.

Note: Full model file is for visual only and not for printing.

Includes cutouts for small speakers/fans. Fill those in if you don't need them.

There is plenty of room in the case for cable management and other devices if desired.

Print with supports as needed.

Required hardware:

M3 screws

M3 threaded inserts similar to these:

https://www.amazon.com/gp/product/B08Z8BF41H/ref=ppx_yo_dt_b_search_asin_title

Pi Fan (if you want one)

Microphone assembly

Small speaker, this one fits well:

https://www.amazon.com/gp/product/B07GJ4GH67/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1