HULK Sliding-Puzzle Print-In-Place (Schiebepuzzle)

Print-In-Place sliding puzzle with 15 movable tiles. 

The perfect little present that nobody throws away!

Dimensions (WxDxH): 49 x 49 x 8mm (Tiles: 12 x 12 mm)

Special option: Depending on your printers tolerances and the used filament it may happen that the tiles are a little loose in the frame and bend downwards when holding the puzzle in your hand. To avoid that the tiles can fall out you may try the additional SPLIT-FRAME WITH BOTTOM. You can let the tiles slide in from the top and than close the frame. It is also very useful if you want to give the frame and tiles DIFFERENT COLORS for an even better look!

Have a look at the MAKERTEAM SLIDING PUZZLE for better understanding about the split-frame.

The fix: This little helper holds your tiles in place.

Other stuff: If you like this please feel free to have a look at our other boardgames & toys: https://www.printables.com/de/@MakerTeam/collections/1067192

The downloadable .stl file contains ALL COMPONENTS. Simply delete in your slicer what you do not want to print.

Have fun!

Material: PLA
Layerheight: 0.2mm
Infill: 15%