Remix of @Mecky1963 s T-Slot nut.
8m
1× print file
0.15 mm
0.40 mm
1.00 g
11
110
3
341
updated February 11, 2024

Description

PDF

Remix of @Mecky1963 s T-Slot nut for M3 screws. Just add a hex nut on the bottom.

As mentioned in the comments of @Mecky1963 s version a fraction of a millimeter needs to be cut of the stem to get enough friction with the extrusion for it to not slide. This is that version.

Also made some other small changes to make it print better. I provided a version with the stem not cut too, just in case.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

  • Stem cut by .4mm as suggested by @ReedBowman_53324
  • Layered the hole for the hex nut to improve printability
  • Cut of some of the bottom corners slightly
  • Slightly increased the diameter of the center screw hole

License